Anti-static technology is a protective measure in general occasions. This is a problem caused by static electricity. In many occasions, anti-static floors are often installed to eliminate the problem of static electricity.Talk to everyone todayAnti-static floorInstallation requirements.

1. The ground should be cleaned thoroughly, and the pay-off positioning should be precise

The anti-static floor manufacturers believe that the cleanliness of the ground directly affects the installation effect of the anti-static floor. Therefore, when installing the anti-static floor, it is necessary to ensure that the original base installation ground is smooth, and some debris and impurities on the ground must be removed. And clean up;At the same time, the anti-static floor manufacturers remind everyone to make a reasonable laying plan according to the modulus of the anti-static floor, combined with the size of the room and the layout of the equipment when positioning and laying out during the installation process.

2. To install and fix adjustable brackets and beams

After deciding the laying method and locating and laying out the work, we must erect the crossbeam and the adjustable bracket according to the elevation control line and the divided position, and then use the level ruler and small line to adjust the support. Height until the same height as the whole room,At the same time, anti-static floor manufacturers remind everyone to level and tighten each screw cap supporting the floor to form a networked bracket to ensure that the anti-static floor is firmly installed.

3. Laying raised floors for anti-static grounding

After the first two tasks are completed, according to the experience of anti-static floor manufacturers, the next step is to carry out the laying of raised floors and the construction of anti-static grounding. When laying the raised floors, make sure that the four corners of the floor are tightly and evenly contacted; For the construction of anti-static grounding projects, the technical performance of anti-static grounding construction must be consistent with the design requirements and construction acceptance specifications.