DamagedAnti-static floorCan it be fixed? How to fix it?With the rapid development of science and technology, anti-static floors have appeared more and more in people's sight. You see, school computer rooms, monitoring rooms, etc., and people's understanding of anti-static floors is becoming stronger and stronger.Because of its special use, it may be damaged after frequent use. If the anti-static floor is completely removed and replaced, it is obviously unrealistic. From the perspective of cost savings, maintenance will continue use! Then the question is coming, how to repair it?

During maintenance, we need to effectively remove the surface of the floor, after removing some debris, and then clean these anti-static floors,This process is also very important for the maintenance of anti-static floors, and then the new veneer is coated with glue, and then wait for a period of time before the veneer treatment,When we are repairing, we also need to pay attention to some details to deal with static electricity, how to repair the damaged anti-static floor so that the floor looks beautiful and clean.

So what should we pay attention to?

Some devices are not allowed to be disassembled by the user, otherwise, the warranty will be lost. Please contact the device manufacturer to confirm before disassembly; each part should be handled with care, especially the hard disk, and must not be bumped; the screws should be properly tightened. Insulation sheets are required for the parts;

After the dust removal maintenance is completed, re-install the hardware into the chassis, connect the cable and the electric floor source anti-static floor to brighten the camera room, try the system first without covering the chassis, see if the fans are running normally, and see if there are plugs that are not strong or different ring.